Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
19 years ago

No respone when running uClinux in NiosII SDKshell

Hello, I am currently using " Altera Stratix 1S10 Development Kit". I am able to creat, configure, build and upload the Kernel as well as File System successfully. For this, I followed the...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
19 years ago

hi, http://forum.niosforum.com/work2/style_emoticons/<#EMO_DIR#>/rolleyes.gif

I think the problem is that u use different configuration between .sof & .ptf, they must be the same. http://forum.niosforum.com/work2/style_emoticons/<#EMO_DIR#>/biggrin.gif

try these :

open : standar.qpf then open SOPC builder and run NIOS II IDE from SOPC builder, the NIOS II IDE will automatically load the standar.ptf

then followthe quickstart guide to create kernel and file system.

and upload kernel then file system.

finaly use quartus programmer to upload the standard.sof

then go and lunch NIOS II sdk shell

I hope it will work now http://forum.niosforum.com/work2/style_emoticons/<#EMO_DIR#>/tongue.gif