Forum Discussion
Altera_Forum
Honored Contributor
Honored ContributorNo arm (no JTAG cable), no chocolate (no boot)
Hello all, I uses a custom PMC (PCI for embedded systems) board which is based on a Altera StratixII EP1S30. This PMC is plugged on a VME board whih is based on a 405GPr processor. The ucLi...
Altera_ForumHonored Contributor
Honored ContributorHi gacimore,
> When a usb-blaster cable is connected to the PMC, the uclinux boots correctly. It means > that the nios2-terminal If you're using the JTAG UART, see the following: http://forum.niosforum.com/forum/index.php...21&hl=jtag+uart (http://forum.niosforum.com/forum/index.php?showtopic=5221&hl=jtag+uart) Regards, --Scott
