Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

niosII dose not work with 8b10b IPCore

Hi,

several days ago,I use DE2 to develop a FPGA project. In this project, I use niosII and 8b10b IPCore. I have not buy the 8b10b license, and the .sof file is time limited. But when I run the compiled niosII software, the develop system give me a error infomation as follows:

Using cable "USB-Blaster [USB-0]", device 1, instance 0x00

Pausing target processor: not responding.

Resetting and trying again: FAILED

Leaving target processor paused

I intend to find a solution on Internet, and I have find this is a bug of quartus 7.1. But the point is that my quartus is 7.2. So I do not why and wondder answers, thanks

1 Reply

  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    15 years ago

    After you download the configuration into the FPGA, you have an alert window saying that you are running an opencore evaluation. Do not close that window, or the design will stop working.