Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

NIOS, jtag & printf

I've got Altera 10.0sp1 installed and am running into a problem using printf with the JTAG uart configuration in my BSP. The net result is that printf either truncates some of the data that I'm prin...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

Looks like I can answer my own question. My external clock is running at 25MHz. My PLL was initially set to create an internal system clock that equaled this 25MHz rate. I bumped that to 85MHz and that cured the problem.

--tim