Forum Discussion
Altera_Forum
Honored Contributor
Honored ContributorNios-II SOPC UART delivers wrong bytes
We use the UART in our Nios-II design that comes with Quartus 5.0SP1 and Nios-II 5.0 We face the problem that sometimes the Uart reports wrong RX Bytes from correct RX streams. The serial str...
Altera_ForumHonored Contributor
Honored ContributorWe had the same problem - I tried to use the UART together with DMA . At lower baudrates (up to about 115k2) it worked more or less. But we looked for baudrates up to 2Mbit/s. Finally we wrote our own UART with 512 Byte deep fifos - for rx and tx.
Chris
