Forum Discussion
Altera_Forum
Honored Contributor
Honored ContributorNios II IDE
Sir, i hv created a SOPC design using nios II (s) , jtag, sdram,pio,timer,sysid using Quartus 7.2 and trying to run hello program on this design using Nios IDE 7.2 . Build is successful, however ...
Altera_ForumHonored Contributor
Honored Contributorchanged run confg to nios hardware configuration , error was removed
however program was not running (pause error) Reinstalled the Quartus7.2 , working fine !! thnx
