Forum Discussion

pdi_eng's avatar
pdi_eng
Icon for New Contributor rankNew Contributor
5 years ago

NIOS II Command Shell cannot execute binary file

I have a board with an FPGA that we have traditionally programmed using the NIOS Command Shell on an XP computer with Quartus 9.1. I have been working on moving the programming operations to a new W...
pdi_eng's avatar
pdi_eng
Icon for New Contributor rankNew Contributor
4 years ago

What does it mean that it "cannot execute binary file"?

BoonBengT_Altera's avatar
BoonBengT_Altera
Icon for Moderator rankModerator
4 years ago

Hi @pdi_eng,

Thank you for posting in Intel community forum, hope this message find you well and apologies for the delayed in response.
Unfortunately for environment 9.1 are already obsolete and we recommend to upgrade to the newer version, however would try out best to clarify your doubts.


Please do try to run with the full command nios-run to see if similar error persisted, and here are some guide to the param for the command to flash which I think might be useful.

Best Wishes
BB

  • BoonBengT_Altera's avatar
    BoonBengT_Altera
    Icon for Moderator rankModerator
    4 years ago

    Hi @pdi_eng,

    Good day, just checking in to see if there is any further doubts in regards to this matter.
    Please do let us know.

    Best Wishes
    BB