Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

NIOS II and DE2-70

I have a DE2-70 board that I was given and am wanting to use the NIOS II processor on. The tutorials that are on the Altera website all refer to an older version of the cyclone 2 processor. This bo...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

Go to www.terasic.com to download the latest project files for this board. Included will be the schematics of the board along with the datasheets of the components used on the board and a manual. The EP2C70 will have enough logic on it to do just about anything you throw at it, so doing the tutorials will not be a problem. Until you write a bunch of large custom IP modules, you probably won't even use 15% of the logic available, even with a multi-processor configuration. This is a really good board. Have fun.

Nails