NIOS II 6.0 EDS Install Hangs

After trying multiple times to install the NIOS II 6.0 EDS and have it hang while "Updating Environment Variables," I was able to find what was causing it. The NIOS install.log file contained the command "jtagserver --start" in it. After thinking about this for a while, it dawned on me that my Cubic Cyclonium was using the USB as a JTAG debugger. So I unplugged the Cubic Cyclonium, rebooted for good measure, then installed the NIOS II 6.0 EDS without any problems.

Hope this helps someone else out there.

Marc