Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
21 years ago

Nios-II 1.1 EPCS Bootloader

Hi All, After I boot from an epcs device the chip select remains asserted (control register = 0x0000_0400). Has anyone else observed this? --Scott BTW: This causes the u-boot e...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
21 years ago

Thanks Jesse ...

... in general, it's probably good practice from a software point-of-view to

assume that the chip select was left in an inappropriate initial state ...

... so it's time for me to use good practice ;-)

Thanks again,

--Scott