Forum Discussion

NRugg's avatar
NRugg
Icon for Occasional Contributor rankOccasional Contributor
5 years ago
Solved

NIOS II - Hanging on ECPQ / SPI initialization

So in our system we've recently added an EPCS/EPCQ flash controller IP. We've regenerated the BSP, it has all the fancy new files, and we're building in NIOS land. However, when the NIOS application...
  • NRugg's avatar
    NRugg
    5 years ago

    Thanks for your time, but I was actually able to find the solution to this recently.

    As it turns out, the issue was entirely configuration related. We added the EPCQ IP to the build, but forgot to actually flash the chip with the new fabric image. So we were trying to access EPCQ registers but the fabric image didn't know how to handle it.

    So if you see this issue, make sure you have the latest and greatest fabric flashed onto your device! This was entirely the source if my issue.

NRugg's avatar
NRugg
Icon for Occasional Contributor rankOccasional Contributor
5 years ago

Thanks for your time, but I was actually able to find the solution to this recently.

As it turns out, the issue was entirely configuration related. We added the EPCQ IP to the build, but forgot to actually flash the chip with the new fabric image. So we were trying to access EPCQ registers but the fabric image didn't know how to handle it.

So if you see this issue, make sure you have the latest and greatest fabric flashed onto your device! This was entirely the source if my issue.

BoonBengT_Altera's avatar
BoonBengT_Altera
Icon for Moderator rankModerator
5 years ago

Hi @NRugg,

Good to know that it is working now, we would be closing the thread. If you have further queries, Please do post a response in the next 15 days.
After 15 days, this thread will be transitioned to community support. The community users will be able to help you with your follow-up questions.

Warm Regards