Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

Neek - Uart

im just a newbie in FPGA programming just want to ask how to add a UART (rs232) into the hardware design. I already tried to add it on SOPC builder and generate and recompile it ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

thanks to you sir Daixiwen

I already got the problem, there are two SOF, the sample (which is not updating) and the limited time SOF (which is updating as i compiled it on quartus).

I did not notice that there are two SOFs, because I used to configure SOF on nios command shell and the sample SOF was the one loading on my FPGA.

But still, I want to thank you for helping me to figure out the problem. I thought it was the hardware design.