Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

Neek - Uart

im just a newbie in FPGA programming just want to ask how to add a UART (rs232) into the hardware design. I already tried to add it on SOPC builder and generate and recompile it ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

is it the assignment on pin planner?

i tried to assign pins on pin planner by assigning HC_UART_RXD to E18 and HC_UART_TXD to H17.

am i doing it right? can you please give me the steps in adding components, especially the UART in hardware design in quartus/SOPC.

thank you for the response.