Forum Discussion
Altera_Forum
Honored Contributor
Honored Contributorneed help for niosII 9.1 flash programmer
when I use USB-Blaster to program flash,it always stop and there are some words say: Using cable"USB-Blaster[USB-0]",device 1,instance 0x00 Resetting and pausing target processor:FAILED Leavin...
Altera_ForumHonored Contributor
Honored ContributorThe FAILED line is the one you need to resolve, first. I've seen this is a number of cases, but it usually happens to me when I connect the clocks/resets incorrectly.
Regards, --slacker
