Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
22 years ago

Multiple .sof and .flash images in Flash Mem

I have a custom board where we have a flash device connected to a single FPGA and then multiple other FPGAs resident. The FPGA hooked to flash will boot from flash upon power up. Thus, there is at...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
21 years ago

Regards,

I'm working with Nios I. My application (a video codec) requires 2 hardware configurations and 2 programs, one for the encoder and the other one for the decoder. The problem is that I don't really know how to download the 2 software flash images into one Flash memory and execute them from the SRAM. The advantage is that the programs shall run separately, that is, not at the same time.

Will it be necessary to change the address in GERMS monitor in order to begin the right program?

Any help? http://forum.niosforum.com/work2/style_emoticons/<#EMO_DIR#>/unsure.gif

Thanks in advance.