Forum Discussion
Altera_Forum
Honored Contributor
Honored ContributorLong Boot Time after update to 5.0
after updating to Quartus / NIOS II 5.0 my design needs about 7 seconds to boot (reboot) from EPCS. With an oscilloscope I've measured, that the FPGA configuration is done in 80 msec. After a sho...
Altera_ForumHonored Contributor
Honored ContributorI edited the two files to set the extra delay to 0.
Reading a sector (0x10000) went from 8sec to ~2sec or less.
