Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
21 years ago

Long Boot Time after update to 5.0

after updating to Quartus / NIOS II 5.0 my design needs about 7 seconds to boot (reboot) from EPCS. With an oscilloscope I've measured, that the FPGA configuration is done in 80 msec. After a sho...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
21 years ago

Hi Jesse,

I'm using Quartus/Nios-II 5.0 w/ SP 1.04 -- I'm still seeing the problem.

Was this supposed to be fixed ... or should I follow the instructions below?

Thanks,

--Scott