Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
21 years ago

Interfacing to a daughter card through PROTO"

Hi. I need to connect to a self-made daughtercard through the proto2 connector on a Nios Development Kit, Cyclone Edition. All the I/O are on the J16 connector. Do I need to enable something special ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
21 years ago

Hi! Some pins on j16 and j12 Interface are shared between PROTO1 and compact flash connector

take a look at page 15 of the MNL_NIOSCYCBD-1.3