Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
19 years ago

Interfacing Matlab with Cyclone II

Hi, I'm currently working on my design project, which requires that I interface Matlab with my Nios II Development Kit, Cyclone II Edition from Altera (link: http://www.altera.com/products...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
19 years ago

Hi

The DSP Builder from Altera is a Interface for Matlab Simulink. This DSP Builder contains a Simulink library. If you build up your Matlab Model out of this DSP Builder Library you can simulate this model in the Simulink and you can generate HDL code and systhesis this on the FPGA Board.

You are not able to simulate the Nios II Softcore Processor in the Matlab environment.

What you can do is to generate your own IP in the Matlab and integrate this in the Quartus Software / SOPC Builder in your NIOS SOPC.

I hop this helps.

mfg flo