Forum Discussion

ASeif's avatar
ASeif
Icon for New Contributor rankNew Contributor
6 years ago

In-place boot on memory

Hi, I am using NIOS II with configuring it to execute in-place (not boot copier). I have a off-chip memory of 128Mb which the program is located there. Previously I use a off-chip memory of 16Mb. ...
Ahmed_H_Intel1's avatar
Ahmed_H_Intel1
Icon for Frequent Contributor rankFrequent Contributor
6 years ago

Hi Ali,

This is weird, are you sure this external memory doesn't have bad blocks? I recommend you change the serial flash controller settings to 64Mb and see if it will be working fine or not. If you still seeing the same issue then you might missing to update something in your design.

If you agree you can share with me a screenshots of the Qsys design and the Top level assignments.

Regards,

  • ASeif's avatar
    ASeif
    Icon for New Contributor rankNew Contributor
    6 years ago

    Hi Em_guy and thanks for your reply,

    While programming I check the "Blank-Check" and no problem reported. The other point is that the memory I use is a new. Therefore bad block probably may not be the reason.

    I attach the screenshots here for more inspection...