Forum Discussion

Chris_'s avatar
Chris_
Icon for New Contributor rankNew Contributor
6 years ago

How to manage multiple clocks in the same bank that each require their own PLL?

I'm working on a Cyclone V GX9 device and I have two input clocks in the same bank. One of these clocks is used by the Nios and a PLL is required for SDRAM clocking. The other clock is referenced to ...
CheepinC_altera's avatar
CheepinC_altera
Icon for Regular Contributor rankRegular Contributor
6 years ago

Hi,

As I understand it, you are observing some Fitter issues when tyring to use fPLL for your XCVR. By merely looking at the error message, it seems to indicate that the refclk pin for the fPLL which drive the XCVR is not assigned to a dedicated XCVR refclk input pin. Would you mind to check if the fPLL refclk is placed to dedicated XCVR refclk pin?

If you have placed the refclk to dedicated XCVR refclk pin and still observe issue, would you mind to share with me a simple test design with only the XCVR instances which could replicate the observation? This would be helpful for me to further look into it.

Please let me know if there is any concern. Thank you.

Best regards,

Chee Pin