How to build u-boot for cycloneII board?

Hi posix6973,

> Can someone tell me the procedure to build u-boot for owner niosII board?

I'm not familiar with the owner niosII board -- you will need to add support for this

board in the u-boot source tree.

> I need u-boot to use it in Altera niosII development kit CycloeII edition and

> owner design CycloneII board.

You will need to add support for these boards. Please read the top-level README -- especially

the section "Building the Software." For the Altera Cyclone II board, you can use any of the

existing Altera boards as a starting point (e.g.: board/altera/ep1c20).

Regards,

--Scott