Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

How to boot nios from CFI flash on Stratix III dev. kit

Hi all, I have a Stratix III development kit and have been trying to boot nios from CFI flash without success. The documentation just talks about creating a .pof from a .sof to configure FPGA from...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

Hello,

i try boot the zImage after power-on on stratix II board and without success too.

Something is descripted on http://www.nioswiki.com/operatingsystems/uclinux/flashprogrammer

but it works only:

Using Altera Nios Dev board, Cyclone II 2C35 , standard example, find out and change the sof path, and cfi base below.

Good luck

Jan Naceradsky, Czech Republic