Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
20 years ago

help!help!

nios2-terminal: connected to hardware target using JTAG UART on cable nios2-terminal: "USB-Blaster [USB-0]", device 1, instance 0 nios2-terminal: (Use the IDE stop button or Ctrl-C to terminate)
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
20 years ago

--- Quote Start ---

originally posted by dspchunjie@Oct 30 2005, 11:34 PM

nios2-terminal: connected to hardware target using jtag uart on cable

nios2-terminal: "usb-blaster [usb-0]", device 1, instance 0

nios2-terminal: (use the ide stop button or ctrl-c to terminate)

<div align='right'><{post_snapback}> (index.php?act=findpost&pid=10683)

--- quote end ---

--- Quote End ---

This means that you are connecting over a USB blaster (the first cable if you have multiple cables), the first FPGA in the JTAG chain, and the first Nios II processor in your system on that particular device. So in short it&#39;s working the way you want it to.