Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
21 years ago

Help with Flash Programmer on custom board

Hi! I've made a board with cpld and flash as in Cyclone Development Kit, but different is cpld EPM3128A only. I ran it on Quartus 4.0 (SP1) and NIOS 1.0 (SP1) and it is configuring and ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
21 years ago

But I use the latest version, it success.

My SW is Nios II 1.1 Eval + Quartus II 4.2 SP1.

HW is Microtronix Cyclone Dev Board.

I mean that if Clk Pin in your Flash Programming Design is assigned to the right Pin in your real design and use the same Pll or reset delay circuit.