Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
21 years ago

Flash Programmer Problems

Hi Everyone, I have built a target board in SOPC builder in order to program the flash memory on my board. The target board contains an EPCS controller and CFI flash controller (the actual board d...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
21 years ago

Have you tested that you can access your EPCS device from a regular SOPC Builder design (not a target board design...)?

- Using the memtest software template is a good way to do this.

- slacker