Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
19 years ago

Flash programmer problem

I try to work with the flash programmer on my custom board At the SOPC builder (board description) I describe my board, only the FLASH tab (I didn’t enter netlist), when I open the flash programme...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
19 years ago

inside the .ptf file

inside MODULE your_epcs_controller_name {}

check for the line (as it should look in your example): 

 flash_reference_designator = "U1";

but now I have no further ideas

IzI