Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
19 years ago

Flash programmer problem

I try to work with the flash programmer on my custom board At the SOPC builder (board description) I describe my board, only the FLASH tab (I didn’t enter netlist), when I open the flash programme...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
19 years ago

For each Flash component in sopc builder (EPCS or CFI) you have to specify which of the flash chips from the board description it is. Open the flash component in sopc and select a chip.

IzI