Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
21 years ago

error during running

can someone help me with this error which appeared to me after building and before the running execution. ""Using cable "USB-Blaster [USB-0]", device 1, instance 0x00 Pausing target processo...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
21 years ago

Hi ahmedazzam,

> Reading System ID at address 0x00911158: does not match

> after building and before the running execution.

> ID value does not match: read 0xFFFFFFFF;

Looks like the base address of your system id component changed.

Check your ptf file to see if the system id is actually at 0091_1158.

Regards,

--Scott