Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

EPCS flash access on BeMicro

Hi, I am doing some debugging using the BeMicro Cyclone III dev board. I have installed a serial configuration device on the board and I want to test the SOPC EPCS Flash controller. I am not u...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

I have the EPCS controller included in my SOPC design. The attached image shows the connection to the top level pins. The write protect pin is not used - this is a place holder for the final board design.