Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
20 years ago

EPCS controller booting trouble

Dear NIOS friends, I am porting a system that was developed on a (custom board) with a EP1C6 to a new board revision with a EP2C8. Both are configured with an EPCS4 device and it worked very we...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
20 years ago

Scott, I made sure that the reset pointer in the SOPC builder _always_ points to the epcs_controller. And the problem occurs when I assign all segments to SDRAM. That's right.