Forum Discussion
Altera_Forum
Honored Contributor
Honored ContributorEPCS Access Problem
We would like to use an RS-232 port to re-program an EPCS part on our board, both configuration and program code. We can program the EPCS4 using the FlashProgrammer utilty just fine. Our board boot...
Altera_ForumHonored Contributor
Honored ContributorThis problem was reported in the forum a few months ago. An explanation and workaround is posted in this thread:
http://www.niosforum.com/forum/index.php?a...ct=st&f=2&t=850 (http://www.niosforum.com/forum/index.php?act=st&f=2&t=850) The problem is fixed in Nios II 5.0.
