Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
19 years ago

download software to de2 board

Every time, i try to download the "hello world" - example from the NIOSII IDE, i get the following error message. ***************************************************************** Using cable...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
19 years ago

After i designed my hardware with the SOPC Builder, i get the pins named "n_reset" and "clk". I mapped "clk" to the PIN_N2 location, but what is the setting for the n_reset-signal??? (DE2 Board with a Cyclone II EP2C35F672C6N)