DK-DEV-3C120N + Linux + 2HSMC for internal usage

Hi,

would you please, adwise me is it possible and how difficult to do the following:

I need a platform with possible linux system, and possibility to run my verilog scheme that reads data over 2 HSMC porst and store this data somewhere into linux memory, so, that my linux programm can handle this data and send some feetback into screen and Ethernet port. I need about 2Mbit of internal memory for my verilog scheme and about very few logic.

From hardware point it is nice to have the following device:

http://www.altera.com/products/ip/processors/nios2/tools/embed-partners/windriver/emb-windriver.html

from Linux side it seems that Wind River should be also siutable:

http://www.altera.com/products/ip/processors/nios2/tools/embed-partners/windriver/emb-windriver.html

My question is: in Wind River it is written that linux uses both HSMC ports. Can I dedicate these ports to my verilog scheme and communicate with linux over some internal connections?

Thank you!

Sincerely,

Ilghiz