Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
11 years ago

cycloneive boot from sd card

Hello to all! I'm working with a cycloneive board. I use the program university avalon sd card interface, and i can read and write a file (fat16) from/to a 2GB sd card. I would copy a .bin ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
11 years ago

Yes, but this is not mandatory.

You could actually define sdram1 region only in boot application and sdram2 region only in real application.

The other part of the physical sdram address range remains unassigned, so it will not be available for mapping in linker .