Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

Configuring TSE & Nichestack

I have Quartus&SBT 11.1, and a board with PHY 83848. I cannot bring up the eth interface with simple socket example. SOPC configuration is good (i hope), but i can't initialize the software: ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

Nothing, doesn't work even if i left the clock_crossing_bridge and clock all design with ddr clock.

It stucks at that DMA loop

But it's correct that

dev->descriptor_base is 0? Shoudn't be the address of the main memory?

It's always 0 (both with externam descriptor memory or internal)