Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

Configuring TSE & Nichestack

I have Quartus&SBT 11.1, and a board with PHY 83848. I cannot bring up the eth interface with simple socket example. SOPC configuration is good (i hope), but i can't initialize the software: ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

This is my new SOPC.

I'm running at 100 MHz sysclock, cpu is directly connected to TSE at 100 MHz, SGDMAs are connected to DDR throught clock_crossing bridge (from 100MHz to 133 MHz).

All timings meeted, ddr ram checked with memtest, all ok