Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

Configuring TSE & Nichestack

I have Quartus&SBT 11.1, and a board with PHY 83848. I cannot bring up the eth interface with simple socket example. SOPC configuration is good (i hope), but i can't initialize the software: ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

I have enabled it, but it seems that's not respoding (program stucks at "InterNiche Portable TCP/IP, v3.1 ").

Is this code correct? 

phy_mdio_io <=  mdio_out_from_the_tse_mac when (mdio_oen_from_the_tse_mac = '1') else ('Z');

Because in http://www.altera.com/literature/ug/ug_ethernet.pdf pag 55 i see a not