Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

Configuring TSE & Nichestack

I have Quartus&SBT 11.1, and a board with PHY 83848. I cannot bring up the eth interface with simple socket example. SOPC configuration is good (i hope), but i can't initialize the software: ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

Ok, i've reassigned base addresses (thanks socrates!) and now i get: 


INFO    : TSE MAC 0 found at address 0x0a013000
WARNING : MAC Groups->pmac_info MDIO is not used, unable to run PHY detection
Created "Inet main" task (Prio: 2)
Created "clock tick" task (Prio: 3)
WARNING : MAC Group - MDIO not enabled! Speed = 100, Duplex =

I'm not using MDIO