Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
21 years ago

configuring a new system

whenever iam creating a new system on SOPC builder and then downloading the .sof file the following message is displayed while running a c/c++ application program Using cable "ByteBlaster I...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
21 years ago

Hi,

At the moment I do not have any reset signal at all. I just set it to vcc on the schematic.

What exactly is the NIOS IDE trying to do via the Jtag port? Is there some trace available to see why it is unhappy?

Thanks!