Forum Discussion
Altera_Forum
Honored Contributor
Honored Contributorcan't connect:no route to host.
Hi,now I am meeting a problem. I ported the uClinux to the DE2 board.I used two DE2 boards to communicate with each other.One board is used as a server with its ip 192.168.135.6,the other is used ...
Altera_ForumHonored Contributor
Honored Contributorthe ifconfig hw ether is not supported.
please check kernel source arch/nios2nommu/kernel/setup.c after line 208. where it gets the hw addr.
