Forum Discussion
Altera_Forum
Honored Contributor
Honored Contributorcan't boot from epcs to external sram
Hello, I have a problem while booting a niosII program from epcs4 to external external sram (1Mx16bit). My sopc system is composed of the following parts: 1) niosII processor, with rese...
Altera_ForumHonored Contributor
Honored ContributorThanks for your advice.
My board has already been designed like this, and it's not easy to change. I will try to use a 8-bit sram controller, and treat my sram as 8-bit width. I will post my results.
