Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

booting out of flash and starting out of DDR2

I have a problem with my DDR2-RAM. I want to boot out of my Flash Device and run the uClinux in my DDR2. The Problem is, that my DDR2 is storing some initalization data in the first regions of t...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

the onchip is way too small and the sram too :(

but that is not my problem

the problem is that uclinux wants to unzip it self to the start of the ddr and the calibration data is killed