Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

booting out of flash and starting out of DDR2

I have a problem with my DDR2-RAM. I want to boot out of my Flash Device and run the uClinux in my DDR2. The Problem is, that my DDR2 is storing some initalization data in the first regions of t...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

I start out of the flash and unzip it in the ddr2, but i need a offset to not erase the inital data. or i need to know where the calibration data is stored and how to copy it to the flash.

the best solution for me is to start uClinux with an offset of 0x1000 or something like that.

is there a way to modify the start adress?