Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
19 years ago

Booting from EPCS to SDRAM with Q-II 5.1

We have a Cyclone-II FPGA (EP2C35F484C6) with a NIOS system and an EPCS64 Flash, where is the configuration of the FPGA and the programm code. We have the reset address pointing at this EPCS device, ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
19 years ago

Do you solve the problem???

I have exactly the same!!!

Everything works fine with JTAG (download from computer to SDRAM) but NIOSII don't boot when download the code from EPCS ( to SDRAM)

Can you help me???

Thanks a lot!!

--- Quote Start ---

originally posted by jlistan@Jun 8 2006, 04:06 AM

hello scott,

we know the sdram works ok, the problem occurs when the application is saved in sdram from the epcs through the boot loader.

thanks.

<div align='right'><{post_snapback}> (index.php?act=findpost&pid=16025)

--- quote end ---

--- Quote End ---