Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
19 years ago

Booting from EPCS to SDRAM with Q-II 5.1

We have a Cyclone-II FPGA (EP2C35F484C6) with a NIOS system and an EPCS64 Flash, where is the configuration of the FPGA and the programm code. We have the reset address pointing at this EPCS device, ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
19 years ago

Hello Scott,

We know the SDRAM works OK, the problem occurs when the application is saved in SDRAM from the EPCS through the boot loader.

Thanks.