Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

Application Hangs after JTAG Cable Removed

I've been working on a system that is on a Cyclone III EP3C400240C8N running a single threaded application. The SOPC contains a JTAG UART that was used for debugging purposes, and the main purpose of...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

I seem to have fixed the issue by lowering the JTAG Debug level on the CPU from 3 to 1. Any ideas why this would fix this?