Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
21 years ago

about .rbf can't be config to FPGA

Hi all I have programed the .rbf file generated by QuartusII into Flash (0x600000,statix 1S10 board). but, the config contoller can't boot the .rbf to FPGA when power on. who can tell me wh...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
21 years ago

Hi niosIIuser,

Yes, the Stratix 1S10 board shipped from Altera. the hardware and software(QII 4.0+sp1) are standard.

my meaning is that :

I have programed the .rbf file to flash in the section: 0x600000 ,but the config controller can't move the user hardware image to FPGA. and also if i use the QII programmer download .sof that the device option have kicked the .rbf option, it can't download to FPGA. error is: the CONFIG_DONE failed go to high.

BTW: I have settled the Flash on the S80 board due to kindhearted man's help. and your mention is custom board that we made also dealed with. It caused when we solder the flash to board.