Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
20 years ago

A Strange Address

When I burn a hardware imge to my falsh, following info displays in the console: ..............................................................................# Programming flash with the FPGA co...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
20 years ago

When the flash programmer is downloading an image to flash, it first puts it's own Nios core on the FPGA (in this case altera_nios_dev_board_cyclone_1c20.sof). The address listed with the --base parameter is the base address of the flash device within this core and has nothing to do with the base address in your own core.

Dennis Scott

Microtronix Datacom Ltd.