New Contributor
Frequent ContributorHi Sebbert,
Apologize for the delayed response as we encounter some technical difficulty.
For your application, I believe that using Frame buffer is possible,we would suggest to set the frame buffer under frame reader only mode.
In this mode, when you set the frame dimensions through the Frame Information register and the frame start address through the Frame Start Address register, the IP core starts transmitting video frames read from DDR.
The frame reader issues an interrupt immediately after coming out of reset. You can use it to synchronize the system and trigger initiation of the first frame.
You may refer to below link for more information:
Hope this answers your question.
Best Regards,
ZH_Intel
